[DiscordArchive] Buwu?
[DiscordArchive] Buwu?
Original source
Buwu?
rektbyfaith
01-12-2024, 01:55 AM #1Archived author: Whomadeit • Posted: 2024-01-12T01:55:56.371000+00:00
Original source
Buwu?
Original source
all 3 ports are open in the router, adn still hanging at realm connect
rektbyfaith
01-12-2024, 01:56 AM #2Archived author: BeastVamps • Posted: 2024-01-12T01:56:02.393000+00:00
Original source
all 3 ports are open in the router, adn still hanging at realm connect
Original source
Try editing firewall
rektbyfaith
01-12-2024, 01:56 AM #3Archived author: Whomadeit • Posted: 2024-01-12T01:56:12.063000+00:00
Original source
Try editing firewall
Original source
Feel like there’s some Buwu there
rektbyfaith
01-12-2024, 01:56 AM #4Archived author: Whomadeit • Posted: 2024-01-12T01:56:17.054000+00:00
Original source
Feel like there’s some Buwu there
Original source
You might have to allow the ports in there I forget exactly
rektbyfaith
01-12-2024, 01:56 AM #5Archived author: Whomadeit • Posted: 2024-01-12T01:56:27.840000+00:00
Original source
You might have to allow the ports in there I forget exactly
Original source
I’m Buwopin rn
rektbyfaith
01-12-2024, 01:56 AM #6Archived author: Whomadeit • Posted: 2024-01-12T01:56:33.562000+00:00
Original source
I’m Buwopin rn
Original source
usually comes down to:
- port forwarding authserver port 3724
- port forwarding worldserver port (8085 by default)
- configuring your public ip in your `realmlist` table in the `address` column
- making sure your firewall allows connection to both your worldserver and authserver
- making sure your `realmlist.wtf` is actually changed when you save it (warmane clients typically sets the file to readonly, so nothing changes when you edit it)
if none of this works, you may have to:
- change the default worldserver port (i've noticed a lot of people have issues with 8085 on windows), this needs to be changed in both realmlist table and `worldserver.conf`
- clean out wow cache/wtf folders (rare, but fixes some issues)
- if you're hosting through a reverse ssh tunnel, your `local_address` should match your `address` column (if you don't know what this means, you're not doing it)
- check if you can even port forward at all (basic ping web server or something), then call your isp if not, sometimes works depending on where you live
rektbyfaith
01-12-2024, 01:57 AM #7Archived author: Whomadeit • Posted: 2024-01-12T01:57:29.409000+00:00
Original source
usually comes down to:
- port forwarding authserver port 3724
- port forwarding worldserver port (8085 by default)
- configuring your public ip in your `realmlist` table in the `address` column
- making sure your firewall allows connection to both your worldserver and authserver
- making sure your `realmlist.wtf` is actually changed when you save it (warmane clients typically sets the file to readonly, so nothing changes when you edit it)
if none of this works, you may have to:
- change the default worldserver port (i've noticed a lot of people have issues with 8085 on windows), this needs to be changed in both realmlist table and `worldserver.conf`
- clean out wow cache/wtf folders (rare, but fixes some issues)
- if you're hosting through a reverse ssh tunnel, your `local_address` should match your `address` column (if you don't know what this means, you're not doing it)
- check if you can even port forward at all (basic ping web server or something), then call your isp if not, sometimes works depending on where you live
Original source
Discord search 2 Buwu 0
rektbyfaith
01-12-2024, 01:58 AM #8Archived author: Whomadeit • Posted: 2024-01-12T01:58:00.176000+00:00
Original source
Discord search 2 Buwu 0
Original source
ok, so if i change the worldserver port to say 8585 i would need to add that port to the realmlist.wtf as well as worldserver.conf and maybe authserver.conf
rektbyfaith
01-12-2024, 02:01 AM #9Archived author: BeastVamps • Posted: 2024-01-12T02:01:01.642000+00:00
Original source
ok, so if i change the worldserver port to say 8585 i would need to add that port to the realmlist.wtf as well as worldserver.conf and maybe authserver.conf
Original source
It always just worked for me
rektbyfaith
01-12-2024, 02:01 AM #10Archived author: Malcrom • Posted: 2024-01-12T02:01:35.178000+00:00
Original source
It always just worked for me
1 Guest(s)
1 Guest(s)