[DiscordArchive] Hi guys, does the `Wintergrasp` works in `azerothcore-wotlk` ?
[DiscordArchive] Hi guys, does the `Wintergrasp` works in `azerothcore-wotlk` ?
Archived author: Nebo • Posted: 2022-09-17T19:05:26.261000+00:00
Original source
Hi guys, does the `Wintergrasp` works in `azerothcore-wotlk` ?
Archived author: Revision • Posted: 2022-09-17T19:06:22.684000+00:00
Original source
Yes
Archived author: BORB • Posted: 2022-09-17T19:10:48.624000+00:00
Original source
now i get an client sent malformed packet error.
Archived author: Revision • Posted: 2022-09-17T19:11:41.311000+00:00
Original source
More than likely port scanners
Archived author: Revision • Posted: 2022-09-17T19:11:54.581000+00:00
Original source
I recommend changing the port the worldserver uses to something not used by anything else
Archived author: BORB • Posted: 2022-09-17T19:32:35.215000+00:00
Original source
I don't know what else to try...
realmlist = 8085
worldserver.conf = 8085
config.wtf = myip (checked with ping)
authserver.conf = 3724
unable to connect...
Archived author: Revision • Posted: 2022-09-17T19:33:38.679000+00:00
Original source
You **don't** change config.wtf as I've explained multiple times
Archived author: BORB • Posted: 2022-09-17T19:36:09.753000+00:00
Original source
i meant realmlist. wtf sorry
Archived author: BORB • Posted: 2022-09-17T19:36:38.394000+00:00
Original source
i didn't touch config.wtf
Archived author: Revision • Posted: 2022-09-17T19:37:20.385000+00:00
Original source
If you can't connect after setting realmlist.wtf to the correct address, the port isn't open or your router (if hosted on the same system) doesn't support NAT loopback.