[DiscordArchive] I set limit value and still not to work, i've seen the problem was because my view distance was on l
[DiscordArchive] I set limit value and still not to work, i've seen the problem was because my view distance was on l
![[Image: unknown.png?ex=690c5cfd&is=690b0b7d&hm=8...81e0b283d&]](https://cdn.discordapp.com/attachments/415944535718494208/987092188695519252/unknown.png?ex=690c5cfd&is=690b0b7d&hm=864857b95e3b6600f4e3b18e3b1c86b903e475a855a3165aec5e31381e0b283d&)
Archived author: Browller • Posted: 2022-06-16T20:31:57.218000+00:00
Original source
I set limit value and still not to work, i've seen the problem was because my view distance was on low, but i want to make the skybox to be fully seen when view distance is on low, is that possible to be modified?
![[Image: unknown.png?ex=690c5cfd&is=690b0b7d&hm=8...81e0b283d&]](https://cdn.discordapp.com/attachments/415944535718494208/987092188695519252/unknown.png?ex=690c5cfd&is=690b0b7d&hm=864857b95e3b6600f4e3b18e3b1c86b903e475a855a3165aec5e31381e0b283d&)
Archived author: ACHERAX • Posted: 2022-06-16T20:33:15.848000+00:00
Original source
Hours T_T
Archived author: ACHERAX • Posted: 2022-06-16T20:33:52.015000+00:00
Original source
But yeah it doesn't seem widely known why a mount's model would just... not show up in mount tab, out of all places, and show up everywhere else
Archived author: ACHERAX • Posted: 2022-06-16T20:34:06.141000+00:00
Original source
It seems like an awfully specific issue
Archived author: <o> • Posted: 2022-06-16T20:34:30.633000+00:00
Original source
i've seen it happen but there are probably multiple reasons for it