[DiscordArchive] spell 85222, effect 0 dummy, effect 1 dummy, if I were to use OnObjectAreaTargetSelect hook on both
[DiscordArchive] spell 85222, effect 0 dummy, effect 1 dummy, if I were to use OnObjectAreaTargetSelect hook on both
Archived author: Telegrill • Posted: 2025-01-05T16:31:40.735000+00:00
Original source
spell 85222, effect 0 dummy, effect 1 dummy, if I were to use OnObjectAreaTargetSelect hook on both of them, would effect 0 be first to be processed by the core before going onto effect 1?
Archived author: Telegrill • Posted: 2025-01-05T16:32:59.668000+00:00
Original source
effect 2 and effect 3 are overrides to effect 0 if talent 387879 point 1 or 2 are set
Archived author: Telegrill • Posted: 2025-01-05T16:36:49.581000+00:00
Original source
effect 1 is supposed to work alongside effect 0, where both filter targets that may have a lower benefit from the healing
Archived author: Telegrill • Posted: 2025-01-05T16:37:19.755000+00:00
Original source
it's a way to ensure people around the paladin are included
Archived author: Telegrill • Posted: 2025-01-05T16:39:25.918000+00:00
Original source
say 1 target is at 50% hp at 3 yards from the caster, and 5 at the cone, but only 4 are at lower than 100%, the one that's from effect 1 should take priority over the one from effect 0 that's at full health
Archived author: Tea • Posted: 2025-01-05T16:55:42.230000+00:00
Original source
the solution... depends
Archived author: Tea • Posted: 2025-01-05T16:56:32.536000+00:00
Original source
first you need to sniff this spell hitting more than 5 targets (look at HitTargets in SMSG_SPELL_GO)
Archived author: Tea • Posted: 2025-01-05T16:56:49.215000+00:00
Original source
for 85222, not the triggered heal
Archived author: Telegrill • Posted: 2025-01-05T16:57:06.627000+00:00
Original source
aight
Archived author: Tea • Posted: 2025-01-05T16:57:32.258000+00:00
Original source
(this matters for spell visual reasons)