[DiscordArchive] Which part doesn't work ? Did you debug it with breakpoints?
[DiscordArchive] Which part doesn't work ? Did you debug it with breakpoints?
Original source
ya but the files get named with a verion number
rektbyfaith
06-01-2024, 02:02 PM #51Archived author: Ashe_X • Posted: 2024-06-01T14:02:09.583000+00:00
Original source
ya but the files get named with a verion number
Original source
and there is a freaking . in the version
rektbyfaith
06-01-2024, 02:02 PM #52Archived author: Ashe_X • Posted: 2024-06-01T14:02:24.114000+00:00
Original source
and there is a freaking . in the version
Original source
so my dum ass brain does not link it togeter what vs is complaing about
rektbyfaith
06-01-2024, 02:02 PM #53Archived author: Ashe_X • Posted: 2024-06-01T14:02:46.047000+00:00
Original source
so my dum ass brain does not link it togeter what vs is complaing about
Original source
as vs show version 143
rektbyfaith
06-01-2024, 02:02 PM #54Archived author: Ashe_X • Posted: 2024-06-01T14:02:55.974000+00:00
Original source
as vs show version 143
Original source
if i showed version 14.3
rektbyfaith
06-01-2024, 02:03 PM #55Archived author: Ashe_X • Posted: 2024-06-01T14:03:04.835000+00:00
Original source
if i showed version 14.3
Original source
i wil insta get it
rektbyfaith
06-01-2024, 02:03 PM #56Archived author: Ashe_X • Posted: 2024-06-01T14:03:11.956000+00:00
Original source
i wil insta get it
Original source
limit of the compiler i take or something wierd
rektbyfaith
06-01-2024, 02:04 PM #57Archived author: Ashe_X • Posted: 2024-06-01T14:04:01.839000+00:00
Original source
limit of the compiler i take or something wierd
Original source
i lose my mind allot about this stuff think its thanks to my work (welding) get lots of plans to make 50% of the time there are numbers on there but they dont say MM or CM or M and allot of people who make these dam plan are not bad but if they dont put it im going be default to MM so i got asked to make an 2 by 1 sqaur
rektbyfaith
06-01-2024, 02:09 PM #58Archived author: Ashe_X • Posted: 2024-06-01T14:09:10.559000+00:00
Original source
i lose my mind allot about this stuff think its thanks to my work (welding) get lots of plans to make 50% of the time there are numbers on there but they dont say MM or CM or M and allot of people who make these dam plan are not bad but if they dont put it im going be default to MM so i got asked to make an 2 by 1 sqaur
Original source
a 1 by 2 MM squar
rektbyfaith
06-01-2024, 02:09 PM #59Archived author: Ashe_X • Posted: 2024-06-01T14:09:35.875000+00:00
Original source
a 1 by 2 MM squar
Original source
call the guy up this is impossible to make
rektbyfaith
06-01-2024, 02:10 PM #60Archived author: Ashe_X • Posted: 2024-06-01T14:10:47.831000+00:00
Original source
call the guy up this is impossible to make
1 Guest(s)
1 Guest(s)