[DiscordArchive] > I am just wondering if Ymir chops out the first 12~ bytes of the buffer for the OPcode so the bina
[DiscordArchive] > I am just wondering if Ymir chops out the first 12~ bytes of the buffer for the OPcode so the bina
Archived author: MaxtorCoder • Posted: 2024-08-18T14:24:03.086000+00:00
Original source
> I am just wondering if Ymir chops out the first 12~ bytes of the buffer for the OPcode so the binary read actually starts at pos 12 ?
Chops out?
Archived author: MaxtorCoder • Posted: 2024-08-18T14:24:03.570000+00:00
Original source
What
Archived author: MaxtorCoder • Posted: 2024-08-18T14:24:15.039000+00:00
Original source
Ymir has the same packet format as what's in WPP.
Archived author: MaxtorCoder • Posted: 2024-08-18T14:24:56.123000+00:00
Original source
https://github.com/TrinityCore/WowPacket...der.cs#L41
Archived author: MaxtorCoder • Posted: 2024-08-18T14:25:02.510000+00:00
Original source
That's for the header
Archived author: _mrfade_ • Posted: 2024-08-18T14:25:03.193000+00:00
Original source
So Ymir reads the packets and parses them into a readable format for Wpp. Including the "Data" byte[] I am wondering if that byte[] starts after the OPcode has been read
Archived author: Fabian • Posted: 2024-08-18T14:25:03.941000+00:00
Original source
just looking at the wpp reader tells you everything
Archived author: MaxtorCoder • Posted: 2024-08-18T14:25:30.575000+00:00
Original source
https://github.com/TrinityCore/WowPacket...er.cs#L144
Archived author: MaxtorCoder • Posted: 2024-08-18T14:25:38.360000+00:00
Original source
The actual packet reader.
Archived author: MaxtorCoder • Posted: 2024-08-18T14:25:44.998000+00:00
Original source
Well yes obviously.