Forums WoW Modding Support Archives Azerothcore Discord Archives [DiscordArchive] How are you triggering your compile?

[DiscordArchive] How are you triggering your compile?

[DiscordArchive] How are you triggering your compile?

rektbyfaith
Administrator
0
10-06-2022, 03:36 PM
#1
Archived author: Nyeriah • Posted: 2022-10-06T15:36:49.689000+00:00
Original source

How are you triggering your compile?
rektbyfaith
10-06-2022, 03:36 PM #1

Archived author: Nyeriah • Posted: 2022-10-06T15:36:49.689000+00:00
Original source

How are you triggering your compile?

rektbyfaith
Administrator
0
10-06-2022, 03:40 PM
#2
Archived author: Himbo Jones • Posted: 2022-10-06T15:40:29.274000+00:00
Original source

I'm following the installation instructions on the azerothcore website at the moment. So after I did the bit with CMake, I hit Open Project to bring up Visual Studio, then set the RelWithDebInfo through Configuration Manager, made sure Active Solution Platform was at x64, and then did a right-click => Clean followed by rich-click => Build on ALL_BUILD
rektbyfaith
10-06-2022, 03:40 PM #2

Archived author: Himbo Jones • Posted: 2022-10-06T15:40:29.274000+00:00
Original source

I'm following the installation instructions on the azerothcore website at the moment. So after I did the bit with CMake, I hit Open Project to bring up Visual Studio, then set the RelWithDebInfo through Configuration Manager, made sure Active Solution Platform was at x64, and then did a right-click => Clean followed by rich-click => Build on ALL_BUILD

rektbyfaith
Administrator
0
10-06-2022, 03:43 PM
#3
Archived author: Bench • Posted: 2022-10-06T15:43:30.661000+00:00
Original source

There should be a log at the bottom of the window with any errors it had
rektbyfaith
10-06-2022, 03:43 PM #3

Archived author: Bench • Posted: 2022-10-06T15:43:30.661000+00:00
Original source

There should be a log at the bottom of the window with any errors it had

rektbyfaith
Administrator
0
10-06-2022, 03:52 PM
#4
Archived author: Himbo Jones • Posted: 2022-10-06T15:52:30.578000+00:00
Original source

Alrighty! I'll take a look at those. I went ahead and tried to run it again fresh just in case. If it fails again I'm gonna check the error log. Be back in ~~5 hours~~ 20 minutes
rektbyfaith
10-06-2022, 03:52 PM #4

Archived author: Himbo Jones • Posted: 2022-10-06T15:52:30.578000+00:00
Original source

Alrighty! I'll take a look at those. I went ahead and tried to run it again fresh just in case. If it fails again I'm gonna check the error log. Be back in ~~5 hours~~ 20 minutes

rektbyfaith
Administrator
0
10-06-2022, 03:56 PM
#5
Archived author: Revision • Posted: 2022-10-06T15:56:30.846000+00:00
Original source

It ends saying what failed but it should say further up in the log why each specific one failed.
rektbyfaith
10-06-2022, 03:56 PM #5

Archived author: Revision • Posted: 2022-10-06T15:56:30.846000+00:00
Original source

It ends saying what failed but it should say further up in the log why each specific one failed.

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)