[DiscordArchive] Does this mean I can’t use deathknights with the module in the lvl 60 bracket?
[DiscordArchive] Does this mean I can’t use deathknights with the module in the lvl 60 bracket?
Archived author: veritas9160 • Posted: 2024-09-27T15:43:27.928000+00:00
Original source
Does this mean I can’t use deathknights with the module in the lvl 60 bracket?
Archived author: Revision • Posted: 2024-09-27T15:53:29.121000+00:00
Original source
I don't think mod-progression-system changes any config options based on the enabled brackets, including expansion.
Archived author: veritas9160 • Posted: 2024-09-27T16:29:04.433000+00:00
Original source
The issue I seem to run into is in order set the level cap for the chosen bracket you have to put that level cap i. The worldserver config. But if you want to have the wotlk expansion content enabled you need to have a player level cap of 80 (or perhaps 71+) I tried setting the level cap to 19 for the 1-19 bracket and the server wold just loop until I changed the expansion content from 2 to 1; wotlk & tbc to just tbc but then that seems to mean no DKs in 60 and 70 content which is a bummer
Archived author: Revision • Posted: 2024-09-27T16:30:49.955000+00:00
Original source
No, for WotLK expansion it probably needs to be at least 55 since that's the level DK can start at
Archived author: Revision • Posted: 2024-09-27T16:32:09.984000+00:00
Original source
I just tested it. I set level cap to 60 and expansion to 2 and it works fine.
Archived author: Revision • Posted: 2024-09-27T16:33:20.904000+00:00
Original source
DK can't start below 55 unless you add all the stats etc for levels before it so it would "boot loop" if it's limited to <55 and such
Archived author: bhr • Posted: 2024-09-27T16:36:33.427000+00:00
Original source
today is my day, the launch will work today, it is known
Archived author: veritas9160 • Posted: 2024-09-27T16:48:24.841000+00:00
Original source
Hmm I’m sure I tried testing it at 60 level cap and it looped but I might’ve also had the heroicclassstartlevel below 55 which might’ve caused the error saying it couldn’t find data sets for class 6
Archived author: veritas9160 • Posted: 2024-09-27T16:48:52.529000+00:00
Original source
Either way glad to know it’s possible, thanks for all of your help