[DiscordArchive] so is the 2nd router connected wirelessly or with a cable?
[DiscordArchive] so is the 2nd router connected wirelessly or with a cable?
Original source
so is the 2nd router connected wirelessly or with a cable?
rektbyfaith
08-03-2024, 10:02 PM #1Archived author: Foe • Posted: 2024-08-03T22:02:38.856000+00:00
Original source
so is the 2nd router connected wirelessly or with a cable?
Original source
cable from main router
rektbyfaith
08-03-2024, 10:02 PM #2Archived author: TheRealToxic • Posted: 2024-08-03T22:02:44.939000+00:00
Original source
cable from main router
Original source
50 meter long xd
rektbyfaith
08-03-2024, 10:02 PM #3Archived author: TheRealToxic • Posted: 2024-08-03T22:02:46.650000+00:00
Original source
50 meter long xd
Original source
okay, and from a LAN port to the WAN port on router 2, yeah?
rektbyfaith
08-03-2024, 10:02 PM #4Archived author: Foe • Posted: 2024-08-03T22:02:56.455000+00:00
Original source
okay, and from a LAN port to the WAN port on router 2, yeah?
Original source
if WAN is the yellow one that is extra, yes
rektbyfaith
08-03-2024, 10:03 PM #5Archived author: TheRealToxic • Posted: 2024-08-03T22:03:11.711000+00:00
Original source
if WAN is the yellow one that is extra, yes
Original source
Yes, ASUS router?
rektbyfaith
08-03-2024, 10:03 PM #6Archived author: Foe • Posted: 2024-08-03T22:03:19.218000+00:00
Original source
Yes, ASUS router?
Original source
yes
rektbyfaith
08-03-2024, 10:03 PM #7Archived author: TheRealToxic • Posted: 2024-08-03T22:03:21.318000+00:00
Original source
yes
Original source
1. Log in to your router’s web interface. The default username is “admin” and the default password is “password.”
2. Navigate to the “Advanced” tab.
3. Click on the “Network” tab.
4. Click on the “WAN” tab.
5. Select the “Bridge Mode” option.
6. Click on the “Apply” button.
rektbyfaith
08-03-2024, 10:04 PM #8Archived author: Foe • Posted: 2024-08-03T22:04:06.105000+00:00
Original source
1. Log in to your router’s web interface. The default username is “admin” and the default password is “password.”
2. Navigate to the “Advanced” tab.
3. Click on the “Network” tab.
4. Click on the “WAN” tab.
5. Select the “Bridge Mode” option.
6. Click on the “Apply” button.
Original source
thats not here
rektbyfaith
08-03-2024, 10:04 PM #9Archived author: TheRealToxic • Posted: 2024-08-03T22:04:35.908000+00:00
Original source
thats not here
Original source
thats the wan page
rektbyfaith
08-03-2024, 10:04 PM #10Archived author: TheRealToxic • Posted: 2024-08-03T22:04:47.690000+00:00
Original source
thats the wan page
1 Guest(s)
1 Guest(s)